| References |
Titles |
Price |
Buy One Now |
Add One to Basket |
|
EN 378-1:2000
|
Refrigerating
systems and heat pumps – Safety and environmental requirements –
Part 1: Basic requirements, definitions, classification, and selection criteria
|
$198.00 |
|
|
|
EN 378-2:2000
|
Refrigerating
systems and heat pumps – Safety and environmental requirements –
Part 2: Design, construction, testing, marking and documentation
|
$158.00 |
|
|
|
EN 378-3:2000
|
Refrigerating
systems and heat pumps – Safety and environmental requirements –
Part 3: Installation site and personal protection
|
$98.00 |
|
|
|
EN
378-4:2000
|
Refrigerating
systems and heat pumps – Safety and environmental requirements –
Part 4: Operation, maintenance, repair and recovery
|
$98.00 |
|
|
|
EN 473:2000
|
Non-destructive testing - Qualification and certification of NDT personnel - General principles
|
$158.00 |
|
|
| EN
583-1:1998 |
Non-destructive
testing - Ultrasonic examination - Part 1: General principles |
$70.00 |
|
|
| EN
1252-1:1998 |
Cryogenic
vessels - Materials - Part 1: Toughness requirements for temperatures
below - 80°C |
$98.00 |
|
|
|
EN
1289:1998
|
Non-destructive
examination of welds - Penetrant testing of welds - Acceptance levels
|
$70.00 |
|
|
|
EN
1291:1998
|
Non-destructive
examination of welds - Magnetic particle testing of welds - Acceptance
levels
|
$70.00 |
|
|
| EN
1593:1999 |
Non-destructive
testing – Leak testing – Bubble emission techniques |
$98.00 |
|
|
| EN
1626:1999 |
Cryogenic
vessels – Valves for cryogenic service |
$70.00 |
|
|
| EN
1708-1:1999 |
Welding
— Basic weld joint details in steel — Part 1: Pressurized
components |
$183.00 |
|
|
|
EN 1711:2000
|
Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis
|
$130.00 |
|
|
|
EN
1713:1998
|
Non-destructive
examination of welds - Ultrasonic examination - Characterization of
indications in welds
|
$70.00 |
|
|
| EN
1779:1999 |
Non-destructive
testing – Leak testing – Criteria for method and technique
selection |
$98.00 |
|
|
|
EN
1982:1998
|
Copper
and copper alloys – Ingots and castings
|
$158.00 |
|
|
|
EN
1984:2000
|
Industrial
valves – Steel gate valves
|
$98.00 |
|
|
| EN/
ISO 9606-3:1999 |
Approval
testing of welders – Fusion welding – Part 3: Copper and
copper alloys (ISO 9606-3:1999) |
$130.00 |
|
|
| EN/
ISO 9606-4:1999 |
Approval
testing of welders – Fusion welding – Part 4: Nickel and
nickel alloys (ISO 9606-4:1999) |
$130.00 |
|
|
|
EN/
ISO 9606-5:2000
|
Approval
testing of welders – Fusion welding – Part 5: Titanium and
titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
|
$126.00 |
|
|
| EN/
ISO 9692-2:1998 |
Welding
and allied processes - Joint preparation - Part 2: Submerged arc
welding of steel (ISO 9692-2:1998) |
$70.00 |
|
|
|
EN
10028-1:2000
|
Flat
products made of steels for pressure purposes –
Part 1 : General requirements
|
$130.00 |
|
|
|
EN
10028-2:1993
|
Flat
products made of steels for pressure purposes – Part 2:
Non-alloy and alloy steels with specified elevated temperature
properties
|
$98.00 |
|
|
|
EN
10028-3:1992
|
Flat
products made of steels for pressure purposes – Part 3:
Weldable fine grain steels, normalized
|
$98.00 |
|
|
|
EN
10028-4:1994
|
Flat
products made of steels for pressure purposes – Part 4: Nickel
alloy steels with specified low temperature properties
|
$59.00 |
|
|
|
EN
10028-5:1996
|
Flat
products made of steels for pressure purposes – Part 5:
Weldable fine grain steels, thermomechanically rolled
|
$98.00 |
|
|
|
EN
10028-6:1996
|
Flat
products made of steels for pressure purposes – Part 6:
Weldable fine grain steels, quenched and tempered
|
$98.00 |
|
|
|
EN
10028-7:2000
|
Flat
products made of steels for pressure purposes –
Part 7 : Stainless steels
|
$198.00 |
|
|
|
EN
10213-1:1995
|
Technical
delivery conditions for steel castings for pressure purposes – Part 1:
General
|
$98.00 |
|
|
|
EN
10213-2:1995
|
Technical
delivery conditions for steel castings for pressure purposes – Part 2:
Steel grades for use at room temperature and elevated temperatures
|
$70.00 |
|
|
|
EN
10213-3:1995
|
Technical
delivery conditions for steel castings for pressure purposes – Part 3:
Steel grades for use at low temperatures
|
$70.00 |
|
|
|
EN
10213-4:1995
|
Technical
delivery conditions for steel castings for pressure purposes – Part 4:
Austenitic and austenitic-ferritic steel grades
|
$70.00 |
|
|
|
EN
10222-1:1998
|
Steel
forgings for pressure purposes - Part 1: General requirements for open
die forgings
|
$59.00 |
|
|
|
EN
10222-2:1999
|
Steel
forgings for pressure purposes – Part 2: Ferritic and
martensitic steels with specified elevated temperature properties
|
$130.00 |
|
|
|
EN
10222-3:1998
|
Steel
forgings for pressure purposes - Part 3: Nickel steels with specified
low temperature properties
|
$70.00 |
|
|
|
EN
10222-4:1998
|
Steels
forgings for pressure purposes - Part 4: Weldable fine grain steels
with high proof strength
|
$66.00 |
|
|
|
EN
10222-5:1998
|
Steel
forgings for pressure purposes – Part 5: Martensitic,
austenitic and austenitic-ferritic stainless steels
|
$98.00 |
|
|
| EN
12263:1998 |
Refrigerating
systems and heat pumps – Safety switching devices for limiting the
pressure – Requirements and tests |
$70.00 |
|
|
|
EN
10269:1999
|
Steels
and nickel alloys for fasteners with specified elevated and/or low
temperature properties
|
$198.00 |
|
|
|
EN 10272:2000
|
Stainless steel bars for pressure purposes
|
$158.00 |
|
|
|
EN 10273:2000
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
|
$130.00 |
|
|
| EN
12300:1998 |
Cryogenic
vessels — Cleanliness for cryogenic service 1998 |
$66.00 |
|
|
| EN
12392:2000 |
Aluminum and aluminum alloys - Wrought products - Special requirements for products intended for the production of pressure equipment |
$130.00 |
|
|
|
EN
12420:1999
|
Copper
and copper alloys – Forgings
|
$158.00 |
|
|
| EN
12434:2000 |
Cryogenic
vessels — Cryogenic flexible hoses |
$98.00 |
|
|
|
EN
12451:1999
|
Copper
and copper alloys – Seamless, round tubes for heat exchangers
|
$130.00 |
|
|
| EN
12452:1999 |
Copper
and copper alloys – Rolled, finned, seamless tubes for heat
exchangers |
$98.00 |
|
|
| EN
12517:1998 |
Non
destructive examination of welds — Radiographic examination of
welded joints — Acceptance levels |
$66.00 |
|
|
| EN
13133:2000 |
Brazing - Brazer approval |
$98.00 |
|
|
| EN
13134:2000 |
Brazing - Procedure approval |
$98.00 |
|
|
